The short answer

The results

ServiceLoudness (LUFS)True peak (dBTP)Files within Spotify’s peak guidanceTone change vs the mix
LuvLang (Professional)-14.3 to -13.9-2.3 to -1.15 of 51.4 dB
LANDR-14.3 to -11.7-0.10 of 50.7 dB
BandLab-12.2 to -8.90.1 to 0.80 of 51.1 dB

“Spotify’s peak guidance” is Spotify’s own advice for masters: keep true peak below -1 dB, and below -2 dB if the master is louder than -14 LUFS, to avoid extra distortion when the file is encoded. “Tone change” is the average size of the per-band change versus the original mix after matching loudness (six bands, 20 Hz to 16 kHz).

Every file, mix by mix

MixLuvLang (Professional)LANDRBandLab
Mix 1-14.0 LUFS / -2.3 dBTP-11.7 LUFS / -0.1 dBTP-8.9 LUFS / 0.8 dBTP
Mix 2-14.2 LUFS / -2.1 dBTP-13.8 LUFS / -0.1 dBTP-11.8 LUFS / 0.3 dBTP
Mix 3-13.9 LUFS / -2.1 dBTP-12.7 LUFS / -0.1 dBTP-11.3 LUFS / 0.1 dBTP
Mix 4-14.3 LUFS / -2.1 dBTP-14.3 LUFS / -0.1 dBTP-12.2 LUFS / 0.1 dBTP
Mix 5-14.1 LUFS / -1.1 dBTP-12.2 LUFS / -0.1 dBTP-10.6 LUFS / 0.7 dBTP

Two controls, for scale

To show what “no mastering” and “automatic reference matching” look like on the same mixes, we ran two free tools too: plain loudness normalization (ffmpeg loudnorm, -14 LUFS, -1 dBTP) and Matchering, an open-source reference-matching master.

ServiceLoudness (LUFS)True peak (dBTP)Files within Spotify’s peak guidanceTone change vs the mix
Loudness-normalize only (control)-14.3 to -13.7-4.3 to -1.04 of 50.0 dB
Matchering (open-source control)-14.9 to -13.7-6.1 to -5.65 of 52.1 dB

What the numbers show

How we measured

Five 60-second excerpts of unmastered mixes from one live band (pop and rock), each sent through every service. BandLab masters were made on BandLab’s website on November 4, 2026 with its default preset at default strength. LANDR masters were made on LANDR’s website before our test; the settings used for them were not recorded, so LANDR’s loudness in particular may reflect a setting choice. LuvLang masters were rendered on November 18, 2026 from the live site, Professional plan, with default settings. Loudness and true peak were measured with ffmpeg’s EBU R128 meter (ITU-R BS.1770-4, 4× oversampled true peak). Tone change compares each master with its source after matching loudness.

Limits. Five excerpts from one band is a small sample; other mixes and genres can behave differently, and each service may have changed since we made these files. We make LuvLang and tested our own service alongside the others; we report only measurements, not listening preferences, and we have not published anything we did not measure. Questions or a different result? hello@luvlang.studio.

Using this data? You’re welcome to cite it with a link to this page.